The Bolt On Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Complete Heimed Steering From Rack Out, Fabricated Coil Bucket Adapters & Weld On Cam Lockouts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As An Occasional Off Road Rig Or One That Sees Majority Street Use.
PERFORMANCE SPECS
- Wheel Travel - Averages 17" Of Useable Wheel Travel ( Depending On Limit Strap / Bump Stop / Shock Configuration)
- Wheel Base: Extended 1.25" Forward
- Track Width: Extended 4.5" On Each Side
- Recommended Tire Size: 37"
- Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)
INCLUDES
- Upper Arms
- Lower Arms
- Spindles
- Heimed Tierods w/ Clevis Adapters
- Fabricated Coilover Adapters
- Cam Lockout Plates
- Grade 8 Hardware
REQUIRES
- Welding Is NOT Required - This Is A Bolt On System, However The Bypass Hoops Must Be Welded Onto The Coilover Adapter And Frame For Installation
- Extended Brake Lines (Minimum 33" Line End To End)
- 10" 2.5" Piggyback Coilovers
- Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
- Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)
OPTIONAL UPGRADES
- Extended Brake Lines - Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
- Bypass Hoops - Our Pre-bent Bypass Hoops Orient Off Of The Coilbucket Adapter And Weld To A Lower Portion Of The Frame -Shock Tabs Come Uninstalled To Aid Installers Of Positioning The Bypasses For Clearancing - Includes All Hardware And Plastic Plugs